BLOG FOR EVERYTHING

I have recently came across a website which looks somewhat like youtube but it organizes all the videos regarding cooking recipes.It is a nice site and it also categories the video based on the country.It not only provides youtube video but also provides the video from other sites.Here is a link for that site www.foodtube.net .Have a look at this site and enjoy it.

If you feel bad then try to change your mood because your mood also affects the people around you.So here is some of the tips to change the mood:

1.The first step to change your mood is done by making happy as a commitment.

2.Smile at everyone you meet.It's OK to fake it at first if you need to, but pretty soon it will be real and it will make you feel good.

3.Laugh by telling some jokes. Seek out jokes, funny people, and funny videos. Be silly.Crack yourself up.Just start laughing. That alone can make you laugh.

4.Let others go first in line, on the road, and at any other opportunity you encounter during the day.

5.Take an Action Step on a Goal. If there is a goal you've been dreaming about for a while, take the first or next step today. This will give you a feeling of control over your life and that will make you feel good. Just one step is all it takes and then plan the step you'll take tomorrow!

6.Moving your body makes you feel good. Exercise will also make you breathe more deeply activating your lymph system which is the body's waste removal engine. Removing toxins through exercise will make you feel great!

7.Get a good dose of your favorite music. Sing along! Dance! Have some fun. Enjoy!

8.Give a treat to yourself. Pick a little something and treat yourself to it. Maybe some chocolate cake, a movie, or something else that will make you smile.

Red blood cells are the cells that contains red colour to the blood.It is a combination of oxygen and hemoglobin which in turn is a combination of iron and other materials.It picks up the oxygen from breathing air and carry that oxygen from the lungs to the trillion of cells in the blood.This oxygen released by the red blood cells helps in converting the nutrients in the food like meat and green vegetables to energy.This red blood cells also picks up the carbondioxide and carries it back to the lungs to be breathed out.

scientists recently found that red blood cell transfusions given to people undergone heart surgery could increase the risk of heart attack or stroke.They conducted a study and looked at the association between red blood cell transfusion and its adverse effect in over 8,500 cardiac surgery patients over eight years.
The study revealed that patients who received a red blood cell transfusion experienced a three-fold increase in complications arising from lack of oxygen to key organs such as in a heart attack or stroke.
They also found that the risks associated with transfusion occurred regardless of the hemoglobin levels (the oxygen-carrying substance in red blood cells), age, or level of patient disability at the time of transfusion.
Red blood cells carry oxygen around the body to supply vital organs.Heart surgeons have assumed that patients who have low red blood cell counts after surgery as a result of blood loss during or shortly after surgery would benefit from a transfusion of donated red blood cells.It was suggested now that such transfusions may cause more problems than they solve.The researchers now intend to carry out a larger study to see if changing transfusion guidelines could improve patient outcomes.It is also suggested that surgeons should think twice before giving their patients a transfusion.
Research is still carried out to find out how red cell transfusions may affect immunity or tissue oxygenation to cause these harmful effects, and to determine how stored donor blood products may be made safer prior to transfusion.

Kung Fu Science is a interesting website to know about kung fu.The first decision you need to make when you come to this Web site is whether you want to use the HTML version or the Flash version. The site is amazing both ways!

FLASH – Here you will find the Flash version of the site. If you don’t have a Flash player, there is a link to download one right there. Just click on the Flash Player button.

HTML – If you chose to view the site in HTML, I recommend just clicking the Next link to continue navigating through the site. The site is like a story. If you follow it right through to the end, it all makes sense. If you skip around, it might feel out of context.

So, what is this site about? Well, it's mostly about the study of physics in relation to Kung Fu. How are the principles of physics used to make Kung Fu successful? Well, this site will delve deeply into that question as Michelle (a physics student) learns how to successfully break three pine boards with her hand with just one strike.

In the introduction, you will learn the purpose of this site and the challenge that Chris issued Michelle. Next, you will move on to meeting Chris and Michelle. From there, you will know what Kung Fu is, how Newton’s Law applies to it and whether or not Michelle successfully studies the physics needed to break the boards.

This is a really fun site that combines science and martial arts. I think it would be a great way to get kids or teens involved in physics. Check it out at

http://www.kungfuscience.org/

Here is a link for a Website that is filled with interactive simulations you can play and learn with.In order to use them, you need to have a Shockwave player. If you don’t have one,don’t worry! There is a button right on the site that will take you to the link you need to download it for free. You’ll find it on the right side of the page near the top. It reads "Get Macromedia Shockwave Player."

There are ten activities to choose from, all with a different subject to teach you about. The activities are: Design and Test, Topographic Maps, Pheromone Trails, Eclipses, Seismic Waves, Ocean Waves, Solar System, Plant & Animal Cells, 4-Stroke Engine and Biomes.
At the top of the simulation there are information about what we are seeing. we also make the font larger or smaller with the A buttons above the text, as well as, scroll up and down with the scroll bar beside the text.It is a very interesting site check out that at
www.forgefx.com/casestudies/prenticehall/

Here is a few tips to increase the lifespan of the printer:

1.GO EASY ON A PAPER JAM:
In case of a paper jam, never force the paper out. This process not only damage the printer, but also leave bits of torn paper inside, which could cause harm later on. To get the paper out smoothly, most printers have a hatch attached at the back that can be easily removed. Once this hatch is removed, you will gain access to the paper wheels and you should be able to see the jammed paper to get it out.

2.AVOID SHUTTING DOWN THE PRINTER IN A IMPROPER MANNER:
Turn off your printer when not in use. This can prevent drying of ink and it also helps to keep the printer functioning at an optimum level. Remember to use the printer’s power button and then remove the plug if need be. Don’t turn the power off if you are in the middle of something.

3.AVOID CHEAP TONER/INK CARTRIDGES: Cheap Toner/Ink Cartridges

Often times, we are tempted to use either compatible, refilled ink/toner cartridges, which is something we all should avoid. That is like buying a compatible spare part for a car instead of buying the original parts. It may somewhat perform the same function as the original, but it would not last as long and it could affect the performance of the vehicle itself. In addition, we need to look at how such companies manufacture their products. In the case of manufacturing cartridges, what actually happens is this: the manufacturer would first purchase empty toner cartridges from end users. They would then strip the toner cartridge to its bare minimum and they would then reassemble them after a little bit of cleaning. The area of specific concern here is the toner drum. There is a set lifespan for this item and no amount of cleaning would extend it.

Every time when you install a program on your PC, most add a small entry to load at startup so when you start that program it takes only a few seconds to start.The problem is that if you have installed a lot or programs, this can slow down you computer at startup and you really don't gain anything from this.So here is a trick to prevent the loading of lot of program during startup:
1.Goto Start--->RUN
2.Type in "msconfig"(without quotes) and press the OK button
3.Select the "Startup Tab" from the system configuration window
4.UnCheck the programs that you do not want to load at startup.
5.Press OK
6.Now you need to reboot your PC for these setting to take effect.
7.When the PC reboots, you will get a message screen telling you are loading a changed file.press OK in that message.

Here is a picture of the richest begger in mumbai.He earns nearly RS.1000/day.

Here is a trick to play any movie in microsoft paint:

1.Play any movie in any player.

2. Hit "PrintScreen(ptr scr)", key.(while keep playing the movie in the player,don't stop it).

3. Open MsPaint.

4. Select "Edit--->Paste" Or Hit "CTRL+V".

5. now You can watch movies in Paint!

6.If you want to do rewind or forward you have switch to the media player playing that video and then press the "rewind" or "forward" or whatever you want as there is no Pause, Next, Previous, Stop etc. buttons in the video running in mspaint

Here is a trick to find sum of values filled in the microsoft word:

1.Draw a TABLE in ms word and ENTER the values.

2.Place the cursor in a CELL(individual box in a table).

3.Press CTRL+F9 to create new field.Now you will get a curly brace.

4.Then TYPE =sum(left)((or)(right)(or)(above) (or)(below)) inside the curly brace in the cell.

5.LEFT is used to find sum of the values to the left of the formula cell in the same row.RIGHT is used to find sum of the values to the right of the formula cell in the same row.ABOVE is used to find sum of the values to the above of the formula cell in the same column.BELOW is used to find sum of the values to the below of the formula cell in the same column.

6.Then PRESS the key F9 to get the sum of the values.

Here is an alternative quick approach to RESTART the computer:

1.Right click on the empty area in the desktop and then click NEW and then SHORTCUT.

2.In the first box of the Create Shortcut Wizard TYPE "Shutdown -r -t 00" and then
Click NEXT.

3.Name the shortcut as RESTART and click FINISH.

4.Then select an appropriate ICON for it.

5.Then click that RESTART ICON on the desktop to restart the computer instead of going to START and then to TURNOFF and then RESTART.

Here is an alternative quick approach to shutdown the computer:

1.Right click on the empty area in the desktop and then click NEW and then SHORTCUT.

2.In the first box of the Create Shortcut Wizard TYPE "Shutdown -s -t 00" and then
Click NEXT.

3.Name the shortcut as SHUTDOWN and click FINISH.

4.Then select an appropriate icon for it.

5.If you want to SHUTDOWN the computer just click that icon and no need to goto START and then select the TURNOFF.

Here is a trick for you to log in into the yahoo messenger using multiple username:

1.Goto Start and enter Run.Type regedit and then press enter .

2.Navigate to HKEY_CURRENT_USER then to SOFTWARE.

3.Then goto YAHOO then goto PAGER and click TEST.

4.On the right side,right-click and choose new Dword value .

5.Rename it as "Plural".

6.Double click it and assign a decimal value of 1.

Now open as many yahoo messengers you want and login with different username.

Here is a set of ten tips which you can follow to increase the speed of your pc:

1.Let your PC boot up completely before opening any applications.

2.Refresh the desktop after closing any application.This removes any unused files from the RAM.

3.Do not set very large file size images as your wallpaper. Do not keep a wallpaper at all if your PC is low on RAM (less than 64 MB).

4.Do not place lot of shortcuts in the desktop.Each shortcut on the desktop uses up to 500 bytes of RAM

5.Empty the recycle bin regularly. The files are not really deleted from your hard drive until you empty the recycle bin.

6.Delete the temporary internet files regularly by typing "%temp%" in the run command and delete all the files.

7.Defragment your hard drive once every two months. This will free up a lot of space on your hard drive and rearrange the files so that your applications run faster.

8.Always make two partitions in your hard drive. Install all large Softwares (like Photoshop, 3DS Max etc) in the second partition. Windows uses all the available empty space in C drive as virtual memory when your Computer RAM is full. Keep the C Drive as empty as possible.

9.When installing new Softwares disable the option of having a tray icon. The tray icons use up available RAM, and also slow down the booting of your PC. Also disable the option of starting the application automatically when the PC boots. You can disable these options later on also from the Tools or preferences menu in your application.

10. Protect your PC from dust. Dust causes the CPU cooling fan to jam and slow down thereby gradually heating your CPU and affecting the processing speed. Use compressed air to blow out any dust from the CPU. Never use vacuum.

By default, Windows XP spins down all hard drives after 20 minutes of inactivity to save power. This can cause significant delays when it is necessary to access the drives after this time. To increase performance and reduce wear and tear on your drives and to disable this feature in Windows XP:

1.Goto start---->control panel---->performance and maintenance----->power options.

2.Then set the 'turn off hard disks' drop down box to 'never' and click 'ok.'

Windows XP's hibernation option allows a computer to copy its current memory contents to the hard drive before shutdown.This allows the system to resume operations exactly where it left off when it was powered down. To do this, it reserves space on the hard drive equal to the amount of physical memory present. If you do not plan to use the hibernation feature, you should ensure that it is disabled, or you are wasting disk space.To disable hibernation:

1.Goto start----->control panel----->performance and maintenance----->power options.

2.Then Goto the 'hibernate'tab and uncheck the 'enable hibernation' checkbox.